Application
Airtight and watertight zippers for waterproof equipment
The manufacturer publishes waterproof equipment across both its airtight and watertight ranges. Choosing between them comes down to whether the assembly has to resist air and pressure loss, or only water ingress.
Sealing requirements
What waterproof equipment calls for
These are the criteria the manufacturer publishes for this kind of assembly. Confirm your own figures against the agreed test conditions.
- Watertight only — IPX6 nylon woven builds (#5 and #8)
- Airtight and pressure-sealed — IPX8 resin and circular builds
- Flexible, lightweight substrates — nylon woven with TPU coating
- HF welding, sewing/tape or bonding, depending on the host material
Quote a Waterproof Equipment build
Send the opening length, the host material and the target rating. Your quote request is pre-filled with this application so the enquiry reaches the right engineering desk first time.
- Application
- Waterproof Equipment
- Matched series
- 5
- Length range
- 5 cm to 100 m
Matched products
5 published series for this application
The manufacturer publishes these series against this application. Every specification on a product page is reproduced from the published parameter table.
IPX8#10 Resin Airtight Zipper
Heavy-duty #10 resin airtight zipper with a TPU sealing layer, rated IPX8 and tested to 60 kPa sealing pressure.
- Material
- TPU
- Seal strength
- 60 kPa
IPX8#5 Resin Airtight Zipper
Compact #5 resin airtight zipper — IPX8 sealed, 30 kPa tested, for lighter waterproof and airtight assemblies.
- Material
- TPU
- Seal strength
- 30 kPa
IPX6#5 Nylon Woven Waterproof Zipper
Flexible TPU-coated nylon woven zipper rated IPX6, with full published pull-strength and dimensional tolerances.
- Material
- Coating: TPU; Tape: Polyester; Teeth: Nylon
- Seal strength
- —
IPX6#8 Nylon Woven Waterproof Zipper
The heavier #8 nylon woven build — same IPX6 TPU coating, stronger structure for higher-durability seals.
- Material
- Coating: TPU; Tape: Polyester; Teeth: Nylon
- Seal strength
- —
IPX8Circular Airtight Zipper
Closed-loop zipper delivering 360° sealing around an opening, IPX8 rated and 60 kPa tested.
- Material
- TPU
- Seal strength
- 60 kPa
Still comparing materials or ratings?
The technical guides cover rating selection, material comparison and what to validate at sample stage before committing to mass production.