Application
Airtight zippers for protective suits and coveralls
Protective suits are a published application across the airtight range, where the opening has to stay sealed while the wearer moves and flexes.
Sealing requirements
What protective suits calls for
These are the criteria the manufacturer publishes for this kind of assembly. Confirm your own figures against the agreed test conditions.
- Flexible fit without losing the seal — nylon woven TPU builds
- Higher sealing pressure — resin or circular IPX8 builds
- Oil resistance — published as “Good” on the resin and circular products
- Sewn-then-taped construction where the host fabric requires it
Quote a Protective Suits build
Send the opening length, the host material and the target rating. Your quote request is pre-filled with this application so the enquiry reaches the right engineering desk first time.
- Application
- Protective Suits
- Matched series
- 6
- Length range
- 5 cm to 100 m
Matched products
6 published series for this application
The manufacturer publishes these series against this application. Every specification on a product page is reproduced from the published parameter table.
IPX8#10 Resin Airtight Zipper
Heavy-duty #10 resin airtight zipper with a TPU sealing layer, rated IPX8 and tested to 60 kPa sealing pressure.
- Material
- TPU
- Seal strength
- 60 kPa
IPX8#5 Resin Airtight Zipper
Compact #5 resin airtight zipper — IPX8 sealed, 30 kPa tested, for lighter waterproof and airtight assemblies.
- Material
- TPU
- Seal strength
- 30 kPa
IPX8Self-Healing Airtight Zipper
Recovers automatically if the chain derails — built for inflatables, rescue gear and any application where a failed seal is not an option.
- Material
- TPU
- Seal strength
- 30 kPa
IPX6#5 Nylon Woven Waterproof Zipper
Flexible TPU-coated nylon woven zipper rated IPX6, with full published pull-strength and dimensional tolerances.
- Material
- Coating: TPU; Tape: Polyester; Teeth: Nylon
- Seal strength
- —
IPX6#8 Nylon Woven Waterproof Zipper
The heavier #8 nylon woven build — same IPX6 TPU coating, stronger structure for higher-durability seals.
- Material
- Coating: TPU; Tape: Polyester; Teeth: Nylon
- Seal strength
- —
IPX8Circular Airtight Zipper
Closed-loop zipper delivering 360° sealing around an opening, IPX8 rated and 60 kPa tested.
- Material
- TPU
- Seal strength
- 60 kPa
Still comparing materials or ratings?
The technical guides cover rating selection, material comparison and what to validate at sample stage before committing to mass production.